Connection to External Equipment
· The safety of the use of the hearing aid with an auxiliary
input cable is determined by the external signal source.
When the input cable is connected to equipment
plugged into a wall outlet, this equipment must comply
with IEC 60601, IEC 60065 or equivalent safety stan-
dards.
Safety Information
· Hearing aids should be adjusted by a trained hearing
care professional
· Never insert cleaning tools into the sound outlet or
microphone inlet. This could damage the hearing aid.
· Remove your hearing aid before sleeping
· Keep your hearing aid in the case for protection when
you are not wearing it
· Be aware of the possibility that the directional micro-
phone in your hearing aid may reduce the volume of
some warning sounds coming from behind you
To Next Page
Loading...
