Sonic SoundGate 3 - Pairing to Mobile Phones and Bluetooth Devices; Prepare Bluetooth Device for Pairing

28
SONIC · SOUNDGATE 3
Pairing to a Mobile Phone
or other Bluetooth
®
Devices
Before streaming audio to your hearing aids, a secure
connection must be established between the
SoundGate 3 and a Bluetooth
®
-enabled device (e.g.,
mobile telephone). Ensure the SoundGate 3 and
Bluetooth
®
device are within 3 feet (1 meter) of each
other during the pairing process.
Prepare
Bluetooth
®
device
for pairing
Refer to the manual of the mobile
telephone or audio device and
prepare the device for Bluetooth
®
pairing as instructed.
Set the
SoundGate 3
into pairing
mode
SN2_ILLU_TopLedFlashingBlue_HI
30
Press and hold the power key
for approximately 5 – 6 seconds until
the LED indicator flashes rapidly
blue.
Pairing mode will be active
for 2 minutes and may be cancelled
by pressing the power key for
3 seconds.