3
Safety and Regulatory Information
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or other wiring that exits the building where the
SonicWall appliance is located.
Power Supply Information
If the power supply is missing from your SonicWall product package, contact SonicWall Technical Support at
https://support.sonicwall.com/contact-support for a replacement.
This product should only be used with a UL listed power supply marked “I.T.E. LPS,” with an output rated 12V
DC, minimum 2.0 A, Tma: minimum 40 degrees C.
Declaration of Conformity
A “Declaration of Conformity” in accordance with the directives and standards has been made and is on file at
SonicWall International Limited, City Gate Park, Mahon, Cork, Ireland.
CE declarations can be found online at https://support.sonicwall.com.
NOTE: Additional regulatory notifications and information for this product can be found online at
https://support.sonicwall.com.
Sicherheitshinweise für den Einbau und
Betrieb
• Weitere hinweise zur montage
• Hinweis zur Lithiumbatterie
• Verwarnung Kabelverbindungen
• Informationen zur stromversorgung
To Next Page
Loading...
