Sonicware LoFi-12 XT - Clearing Sequence and Track Data

Editing Sequences
Clearing steps
1
Press the
CLR
button with the ST EP.
The note and parameter lock data from that step will be cleared.
Clearing track data
1
Press the
CLR
button with the TRACK PAD.
2
Select the item to clear, and press the
OK
button.
CLR TRACK DATA
ALL This will clear all track parameter and sequence data.
PRM This will clear the track parameters.
SEQ This will clear all sequence data.
LCK This will clear parameter locking data in the sequence.
• To return the parameter pad settings to their default values,
press
CLR
+ PARAMETER PAD.
103