Sonicware LoFi-12 XT - Sample File Setup; Supported Sample Files and Slots

Sample File Setup
Sample les that can be used with Lo-12 XT
The Lo-12 XT is a Lo-/Low-res sampler that only supports 12kHz or
24kHz/16bit mono WAV les.
All the presets are included in the above le formats.
There are three ways to create sample les for use with the Lo-12
X T.
1. Sampling with the Lo-12 XT.
2. Converting audio les with our original Lo convert engine that
makes it easy to create the “Lo-12 sounds”.
3. Importing audio les that you created 12kHz or 24kHz/16bit
mono WAV les (up to 40 seconds) into the Pool folder.
Sample Slots
A single project has up to 256 sample slots. Sample les can be
loaded into the slots for use in tracks.
38