REVERB/DELAY page
REVERB
A knob PRE DELAY
0 - 127：
Pre-delay time
B knob DECAY
0 - 127：
Decay time
C knob LO CUT
0 - 127：
This adjusts the gain of the
low-cut EQ.
The higher the value, the more
low frequencies will be cut.
D knob HI DUMP
0 - 127：
This adjusts the attenuation
of high frequencies.
The higher the value, the
less high frequencies are
attenuated.
Auxiliary
right button
GLOBAL
OFF/ON
O F F：
Use the settings saved in the
pattern.
O N：
The current settings are saved
and used as global settings.
87
To Next Page
Loading...
