To Next PageTo Next Page
Need help?Do you have a question about the Sonifex Redbox RB Series and is the answer not in the manual?
Details the company's repair/replacement policy and purchaser responsibilities.
Instructions for checking the Redbox package contents upon delivery.
Information on registering your product for updates and support.
Covers mains operation, voltage checks, and fuse ratings for safe use.
Details on power cable requirements and correct wiring connections.
Guidance on specifying the correct mains lead for different regions.
Advice on suitable atmosphere, EMI shielding, and mounting methods.
Information on front and rear rack mounting kits for Redbox units.
Instructions for installing optional video sync boards in RB-DSD1.
Sonifex's statement on waste electrical equipment and hazardous substances.
Overview of the RB-ADDA's function as an A/D and D/A converter.
Covers block diagram, front panel indicators, and rear panel connections.
Details front panel controls for status, input selection, and sync modes.
Instructions for calibrating the unit for optimal performance.
Comprehensive technical data for the RB-ADDA unit.
Overview of the RB-ADDA2, an enhanced A/D and D/A converter.
Illustrates the internal signal flow and components of the RB-ADDA2.
Describes front panel buttons and LEDs for controlling unit functions.
Details the rear panel inputs, outputs, and connectors for the RB-ADDA2.
Information on remote control and firmware updates via RS232.
Comprehensive technical data for the RB-ADDA2 unit.
Overview of the RB-DAC1's function as a digital to analogue converter.
Covers the block diagram and front panel indicators for the RB-DAC1.
Details front panel controls and rear panel connections for the RB-DAC1.
Comprehensive technical data for the RB-DAC1 unit.
Overview of the RB-SP1's function as a digital splitter and combiner.
Illustrates the signal routing and components of the RB-SP1.
Details front panel controls, LEDs, and switch functions for the RB-SP1.
Describes rear panel connections and dipswitch settings for the RB-SP1.
Comprehensive technical data for the RB-SP1 unit.
Overview of the RB-DS2's function as an audio delay synchroniser.
Details on using Compact Flash for extended delay times (FAT/RAW).
Covers the block diagram, front panel controls, and delay setting.
Guide to accessing and navigating the main system menu.
Explanation of the bypass mode and system reset button.
Details the rear panel connections, including analogue and digital I/O.
Information on remote control and firmware updates via RS232.
Comprehensive technical data for the RB-DS2 unit.
Overview of the RB-PD2 profanity delay for live broadcast.
Illustrates the signal flow and components of the RB-PD2.
Steps to get the RB-PD2 operational for live broadcast.
Details on Build Delay, Play File modes, and setting delay times.
Description of front panel controls for delay, dump, and cough functions.
Information on remote control and firmware updates via RS232.
Details rear panel connections, inputs, outputs, and storage device.
Comprehensive technical data for the RB-PD2 unit.
Overview of the RB-SD1 unit for monitoring unattended audio feeds.
Illustrates the signal flow and components of the RB-SD1.
Details rear panel connections, including inputs, outputs, and controls.
Details on audio inputs, outputs, and silence detection trigger levels.
Configuration settings via front panel DIP switches for various modes.
Pin connections and descriptions for the remote control connector.
Description of front panel LEDs, buttons, and indicators.
Explanation of special modes like Signal Detection and Force Main.
Comprehensive technical data for the RB-SD1 unit.
Overview of the RB-DSD1 digital silence detection unit.
Illustrates the signal flow and components of the RB-DSD1.
Description of front panel controls, LEDs, and buttons.
Details front panel DIP switch settings for duration, mode, and sync.
Configuration of sync sources, input selection, and mode settings.
Configuration of input selection, restore mode, and remote start.
Guide to using the SCi software for unit configuration and updates.
Configuration options via SCi software interface pages.
Comprehensive technical data for the RB-DSD1 unit.
Details pin configurations for male and female XLR connectors.
Shows signal and ground connections for RCA phono connectors.
Details pin configurations for 1/4" jack connectors.
Shows pin configurations for 25, 15, and 9-way D-Type connectors.
Definitions for terms like ADSL, AES, AM, APT-X, ATRAC, Attenuation.
General
