What to do if my SONIQ Blu-ray Player remote control is not working?
If your SONIQ Blu-ray Player isn't responding to the remote, try these steps: First, connect the product to the power outlet. Then, make sure you're pointing the remote directly at the player. Check that the batteries are inserted correctly and, if needed, replace them with new ones.
General| Brand | SONIQ |
|---|---|
| Model | QPB302B Qplay |
| Category | Blu-ray Player |
| Language | English |
Warnings and precautions to prevent fire, electric shock, and other hazards.
Identifies and describes the main unit controls and rear panel connections.
Details the functions of each button on the remote control.
Provides instructions and diagrams for connecting the player to a TV via composite, component, or HDMI.
Guides through initial setup, including finding the correct viewing channel and setting the display language.
Covers basic playback operations like play, pause, stop, fast forward/reverse, and slow forward.
Covers initial setup options like Screen Saver, Disc Auto Playback, CEC, and Disc Auto Upgrade.
Guides on selecting the appropriate video output resolution for the TV.
Instructions for setting parental control levels to restrict access to discs based on ratings.
Settings for internet connection, information, connection test, and IP settings.
How to enable or disable the internet connection for the player.
Settings for adjusting TV screen format and video processing.
Options to select screen format (16:9 Full, Normal, Pan&Scan, Letterbox) for optimal display.
Settings for audio output modes and HDMI audio.
To Next Page