44
ENEN
ON /OF F MO DE
FAN 1 FAN 2
TI MER OS C
白色
白色
符春暖
2016/12/17
30 MM
6.6 MM
378/379单FSJ-D2遥控器
黑色遥控器，银白两色丝印
LOGO尺寸：25X5.5MM
LOGO靠上，预留贴纸位置
There must be a tab to
isolate and protect the
battery (see examples on
the left). Printed on the
tab has to be an indi-
cation for customer to
understand that this tab
has to be removed before
use.
Example Example
20 mm
8.8 mm
WEEE + CE label for the back
of the remote control
ON/OFF
FAN 1
TIMER
FAN 2
MODUS
OSCILLATION
4. TIMER
The timer can be set between 1 and 7 hours. The timer button has three corresponding lights: 1H / 2H / 4H.
Each pressing of the timer button will add one hour to the time set. (Pressing once = 1 hour, pressing seven
times = 7 hours.)
The corresponding lights (1H / 2H / 4H) will light up in different combinations depending on the time set. For
instance: Setting the timer for one hour will illuminate 1H. Setting the timer for seven hours will illuminate 1H,
2H and 4H since 1+2+4=7.
5. OSC
Press the “OSC” once: the fan will oscillate left and right automatically. Press once more to stop oscillation.
Meanwhile, you can adjust the vertical angle manually.
6. The unit has 3 modes: Normal/Natural/Sleep.
7. The two fans in the unit can be adjusted independently of each other.
8. Disconnect the plug if you do not use the unit for a longer period of time.
9. REMOTE CONTROL
To Next Page
Loading...
