Sonoff iHost - Page 3

Shenzhen SonoffTechn010gies co., Ltd.
Instruction of buttons operation
English
Button
Switch button
Zigbee device pairing button
Security button
Reset button
Features
Instruction
1. Press to power on and the LED indicator is on.
2. Press and hold the button for 3s, LED indicator is off.
Press to enter the device pairing status, the button
indicator is on and the LED indicator is breathing yellow.
*In pairing status, press again to exit the pairing status
and the button indicator will be Off.
1. Press to enter the arm status and the button indicator is on.
Press again to disarm and the button indicator is off.
2. When the speaker is sounding and the button indicator is
flashing during the arming or disarming status, press the
button to silence and stop the LED indicator flashes.
*Set the Arm and Disarm can be set In the centre admin console.
1. Double press the reset button to reset the password
(select "Forgot password" in iHost centre admin console to
reset the password).
2. Press for IOS to reset.
iHost is a local smart home hub that controls the devices in the centre admin console
through the LAN, enabling device adding, control and smart scene setting without
connecting to the cloud, allowing to set smart security or set alarms for various smart
scenes, and checking the Logs Of devices or smart scenes.
Smart Security
CAN Control
Local Smart Scene
Data Local Storage
Open API Interface
ooo
Til
Support Multiple
Terminal Control
Zigbee 3.0 Hub
Compatible with
Multiple Devices Type
8