Sonoff RM433 - Buttons Instructions; Example 1: iFan03 Wi-Fi Fan & Light Controller; Example 2: D1 Wi-Fi smart dimmer

5
SONOFF TECHNOLOGIES CO., LTD.
English
Buttons Instructions
Example 1: iFan03 Wi-Fi Fan & Light Controller
Functions
Buttons
Mute
On/Off (light)
High speed
Off (fan)
Medium speed
Low speed
Long press for 5s until the ceiling fan makes two sounds “di di” to clear
the code successfully.
After clearing code is complete, if you need to use the product, please
press any button within 5s after powering on again until the ceiling fan
makes a sound “di”, and pairing is successful.
Long press for 5s until the fan makes two short and one long "bi" sound
to enter the quick pairing mode (Touch),.
Then you can add the light on eWeLink APP. In quick pairing mode, you can
short press any button on the remote controller to exit this mode.
Example 2: D1 Wi-Fi smart dimmer
Functions
Buttons
On
Off
Short press for the low brightness, long press to turn down the brightness
Short press for the medium brightness, long press to turn down the brightness
Short press for the higher brightness, long press to turn up the brightness
Short press for the high brightness, long press to turn up the brightness
Long press for 5s until the connected light enters the breathing
mode, which indicates the device enters quick pairing mode (Touch),
then you can add the light on eWeLink APP. In quick pairing mode,
you can short press any button on the remote controller to exit this
mode.
Long press for 5s until you hear “Bi Bi” and release, then the remote
controller is cleared successfully. If you need to use, short press
any button within 5s after powering on again and you will hear “Bi”,
which indicates the remote controller is paired successfully.