After powering on, the device will enter the Pairing Mode defaulted during the first use, and the
LED indicator flashes in a cycle of two short and one long.
*The device will exit the Pairing Mode if it is not paired within 10mins. If you want to enter this
mode again, please long press the button for 5s until the LED indicator flashes in a cycle of two
short and one long and then release.
Method 1: Matter Pairing
Open a Matter-compatible App (e.g. Alexa App, Google Home App, or Apple Home App, etc.) to
scan the Matter QR code on the Quick Guide or the device itself to add the device.
Add device
Add to Alexa via Matter
Add to Google via Matter
Add to Apple via Matter
To Next Page
Loading...
