Sonoff TX T4EU1C - App Setup and Device Pairing; Download and Install eWeLink App; Device Power On and Pairing Mode; Add Device to App

7
eWeLink
eWeLink
eWeLink
works with everything
3
Download the APP
After powering on, the device will enter the quick pairing mode (Touch) during the
rst use. The Wi-Fi LED indicator changes in a cycle of two short and one long ash.
The device will exit the quick pairing mode (Touch)if not paired within 3mins. If you want to
enter thismode, please long press the Touch switch for about 5s until the Wi-Fi LED indicator
changes in a cycle of two short and one long ash and release.
Tap “+” to operate following the prompt
on the APP.
4
Power on
5
Add the device