18
3 Suitable bulbs
Fig. 2: Suitable bulbs
All dimmable bulbs without a cut-in unit are suitable for the lamp
attached to the device if they bear the correct symbol (Fig. 2) on
their packaging, e.g.:
Halogen bulbs
Dimmable LED bulbs
Conventional light bulbs
The dimmer function may be restricted depending on the
technical design of the bulb. This is due to the bulb and is
not a fault in the device.
4 Unpacking the device and commencing
operation
1. Unpack the device and all accessories, and check the con-
tents for completeness and integrity.
Should you detect any damage, contact your dealer or
our customer support immediately (see “Contact data”
on page 12).
A NOTICE!
Risk of damage to property due to incorrect voltages
Connection values that exceed the maximum allowable values
of the device can irreparably damage the device.
– Only operate the device if the voltage indicated on the
device matches the voltage of your power outlet.
Bedienungsanleitung sonoroLIGHT_DE_EN_FR_NL_IT_2015-10-12.indd 18 12.10.2015 11:27:03
To Next Page
Loading...