(Music only)
Swipe left to go to the previous song.
Note: You can’t skip forward or go back when
listening to a radio station.
IR sensor The IR (InfraRed) sensor receives signals sent by
a remote control.
Note: If you don’t want anyone (like a child) to control playback or change the volume using the
speaker touch controls, you can disable them in the room’s settings.
Connector panel
HDMI ARC Use an HDMI cable to connect Amp to your TV’s
HDMI ARC port.
Join button Press to connect during setup.
AC power (mains) port Use only the supplied power cord (using a third-
party power cord will void your warranty).
Note: Insert the power cord firmly.
Analog audio in Use a standard RCA audio cable to connect Amp’s
analog audio inputs to the audio outputs from a
separate audio component, such as a turntable or
a portable music player.
Ethernet ports (2) Use an Ethernet cable if you want to connect to a
router, computer, or network-attached storage
(NAS) device (optional).
Subwoofer output
Note: If you disconnect your subwoofer,
make sure to also disconnect the
subwoofer’s cable from the Amp
output.
Connect a powered subwoofer to this output using
a standard RCA cable. The system will detect
when a cable is connected to the subwoofer
output and adjust the crossover frequency
automatically.
Speaker terminals Use high-quality speaker wire to connect your
speakers to Amp.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
