4 Position the wall mount bracket over
the marked screw locations, using a
level to confirm accuracy. Use a
Phillips-head screwdriver or a power
drill to screw the bracket to the wall,
making sure the arrows in the center
are pointing up.
5 Screw the 2 knobs into the back of
the soundbar until they are fully
tightened.
6 Connect the power and HDMI cables
to the back of the soundbar.
Note: If you’re connecting the cables
to the TV at this time, be sure to plug
the HDMI cable into the HDMI ARC or
eARC port on your TV.
To Next Page
Loading...
