Sonos ZONEPLAYER S5 - Using Line-In; Connecting External Sources

Sonos ZonePlayer S516
ENGLISH
DEUTSCH
NEDERLANDS
SVENSKA
3. Remove the headphone jack from the back of the ZonePlayer S5 when you are
ready to resume listening through the built-in speakers.
Using Line-In
You can connect an external source, such as a portable music player, to your Sonos
ZonePlayer S5. The device will be automatically detected as soon as you plug it in.
• To connect a portable music player, use the supplied 1/8" (3,5mm) stereo
audio cable to plug a music player into the Audio In connection on the
back of your S5.
• To connect another external source, such as a CD player, you can use a 1/8"
(3,5mm) mini-stereo to RCA audio cable. Plug the mini-stereo end into the S5,
and plug the RCA end into the audio outputs on the external device.
Using a Sonos Controller 200 or a Sonos Controller for iPhone:
• To play music from this line-in source, select Line-In from the Music Menu,
select the source, and select Play Now.
• To change the name of this device, select Settings→ZonePlayer Settings.
Select the ZonePlayer this source is connected to, and then touch Line-In
Source Name. Select a new name from the list, or type a unique name.
Caution: Long term exposure to music played at high volume through
headphones can cause permanent hearing damage.