SonoSite X-Porte - Connect Wireless Adapter Assembly to X-Porte System

English Deutsch Español Français Italiano Português
1
Nederlands
Thisdocumentprovidesinstructionsforinsertingandattachingthewirelessadapterassemblytothe
X‐Porteultrasoundsystem.
Afterinstallation,yourwirelessadaptermayneedtobeactivated.Toactivateyourwirelessadapter,
pleasecontactFUJIFILMSonoSiteTechnicalSupport.Forcontactinformation,see
“Technical support
and customer comments”
onpage 4.
Forgeneralinformationaboutconfiguringwirelessnetworkaccess,seetheX‐PorteUserGuide.
Connect the Wireless Adapter Assembly to the X-Porte
System
Perform this procedure on the back of the X-Porte system
beneath the power button.
In kiosk mode: