SonTek ADP - Page 29

SonTek
ADP Software Manual Version 6.42 (November 1, 2000)
23
parameters. When the desired parameters have been set, press ESC to return to normal
SONTERM operation. The most-recent parameter settings are saved to the computer hard disk
and used when running SONTERM.
Changing Communication Parameters (ALT+S)
Parameter Keystroke and Function
Communication port F1 - COM1 F2 - COM2
Baud rate 1 - 300
2 - 1200
3 - 2400
4 - 4800
5 - 9600
6 - 19200
7 - 38400
8 - 57600
9 -115200
Parity N - none
E - even
O - odd
H - high
L - low
Data bits Alt+F7 - 7 Alt+F8 - 8
Stop bits Alt+F1 - 1 Alt+F2 - 2
Defaults D - Return all settings to default values (COM1, 9600 baud, no parity, 8
data bits, 2 stop bits)