Sony Ericsson HCB-30 - Page 6

N
o
t
for
C
o
m
m
e
r
c
i
a
l
U
s
e
6 Preparing the car handsfree
Indicator lights
Instructions
Instructions in this User’s Guide are based on car
handsfree keys and phone keys. For example, the
key or the
YES key on the phone can be used to answer
a call.
Getting Started
Before you start using the car handsfree with a phone
for the first time, you need to:
• Have the car handsfree kit installed in the car.
Please refer to the Installation Guide.
Note: Please note that the car handsfree should be
installed by authorised personnel. Check with your
car dealer for recommendations on professional
installation engineers.
• Pair the car handsfree with your mobile phone. See
“Pairing the car handsfree” on page 7.
To turn the car handsfree on
• Turn the ignition key to on, or press and hold
until you hear a short low tone followed by a short high
tone. The backlight of the control panel is blue. The car
handsfree is on.
Note: The first time the car handsfree is turned on, and
whenever no devices are paired with the car handsfree,
it will automatically be ready for pairing.
The indicator light...
is green Network coverage and
ongoing Bluetooth
connection.
is red No network coverage and
ongoing Bluetooth
connection.
flashes green slowly Ongoing call.
flashes green and red Pairing mode.
flashes red Creating a Bluetooth
connection.
is off No ongoing Bluetooth
connection.