2
Select Route based.
3
Scroll to Route:, select Edit and select
a route.
4
Scroll to Live compare and select Edit.
5
Scroll to the result you want to
compare with and select Compare.
6
Select Done and then Start.
A GPS location is required before results
can be compared. For more information,
see Using GPS on page 54.
To end a training session manually
•
During a training session, select
Pause > End.
Results
The training result is shown after a
session is ended. You can view past
results anytime, and compare them if
they have GPS data.
To view a training result
1
Select Menu > Location services >
Tracker > Results.
2
Scroll to a month and select View.
3
Scroll to a date and select View.
4
Select a training result. If you have used
laps, press or to view result per lap.
To compare results
1
Select Menu> Location services >
Tracker > Results.
2
Scroll to a result and select Options >
Compare.
3
Select a result to compare with.
A GPS location is required before results
can be compared. For more information,
see Using GPS on page 54.
Energy consumption
To calculate and view the energy
consumption for a session you must
first set your personal profile in
Settings in Tracker. You view the
energy consumption in the result view.
To set the personal profile
1
Select Menu > Location services >
Tracker > Settings > Personal profile.
2
Select an item, enter data and select
OK.
3
When finished, select Options > Save
profile.
To turn on energy consumption
•
Select Menu > Location services >
Tracker > Settings > Energy
consumption > On.
GPS 57
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
