Sony a7CII Startup Guide

EN
4
This camera is compatible with USB-PD (USB Power Delivery).
When a device compatible with USB-PD is connected to the
camera, fast charging is possible. We recommend using a
USB-PD device that is compatible with an output of 9V/3A
or 9V/2A.
Attaching a lens
Mounting indexes

Mount the lens by aligning the
two white index marks (mounting
indexes) on the lens and camera.

While pushing the lens lightly
toward the camera, turn the lens
slowly in the direction of the arrow
until it clicks into the locked position.
Performing initial setup for the camera
By establishing a Bluetooth connection (pairing) between the
camera and a smartphone, you can perform initial camera
setup such as date and time settings from the smartphone.
Install the dedicated application on your smartphone in
advance, and then follow steps

to

under “Procedures for
initial camera setup.”
Installing the dedicated smartphone application
Install the application from the following
website. Also, update to the latest version of
the dedicated application. The specifications of
the dedicated application may change without
notice.
https://www.sony.net/ca/

Sony a7CII Specifications

General

Effective Megapixels	33.0 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Autofocus System	Fast Hybrid AF (phase-detection AF / contrast-detection AF)
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting	Up to 10 fps
Dimensions	124.0 x 71.1 x 63.4 mm
Image Processor	BIONZ XR
Sensor Type	Full-frame CMOS
Video Recording	4K 60p
Viewfinder	0.39-type electronic viewfinder
LCD Screen	3.0-inch vari-angle touchscreen
Connectivity	Wi-Fi, Bluetooth, USB Type-C
Weight	514 g (with battery and memory card)
Memory Card Slots	1 (SD/SDHC/SDXC, UHS-II compatible)