EN
5
EN
Procedures for initial camera setup
ON/OFF (Power) switch
Control wheel/center
button
Set the ON/OFF (Power) switch to
“ON” to turn on the camera.
Select the desired language and
then press the center of the control
wheel.
• The privacy notice screen will
appear. Read the privacy notice
regarding biometrics by opening
the link using your smartphone, etc.
Press the center of the control wheel.
Follow the instructions on the
camera screen to connect the camera
with your smartphone and perform
the initial setup.
• You can also configure or change
the initial settings later from the
MENU of the camera.
Pairing the camera with your smartphone later
(Smartphone Connection)
For details on the connection method, refer to
the following Help Guide URL:
https://rd1.sony.net/help/ilc/2360_pairing/h_zz/
To Next Page
Loading...
