ILCE-7SM3
5-060-467-41(1)
EN
37
\\Win-473\camera\CX85000(OT)UUD_IM\Multi\04_Compose\5060467411_14lang\5060467411ILCE7SM3CEC\01EN-ILCE7SM3CEC\040SHT.indd
DTP data saved: 2023/12/27 17:47
PDF file created: 2024/01/19 12:00
EN
Cont. Shooting
Shoots images continuously while you press and hold down the shutter
button.
1
Select / (Drive Mode) on the control wheel
[Cont. Shooting].
• You can also set the drive mode by selecting MENU (Shooting)
[Drive Mode] [Drive Mode].
2
Select the desired mode using the right/left side of the control
wheel.
Continuous Shooting: Hi+: Images are shot continuously at the
maximum speed while you press and hold down the shutter button.
Continuous Shooting: Hi/ Continuous Shooting: Mid/
Continuous Shooting: Lo: Subjects are easier to track because
the subject is displayed in real-time on the monitor or viewfinder
during shooting.
Hint
• To continuously adjust the focus and exposure during continuous shooting,
set as follows:
– [ Focus Mode]: [Continuous AF]
– [AEL w/ Shutter]: [Off] or [Auto]
Note
• When the F-value is greater than F11 in [Continuous Shooting: Hi+],
[Continuous Shooting: Hi] or [Continuous Shooting: Mid] mode, the focus is
locked to the setting in the first shot.
• The subject is not displayed in real-time on the monitor or viewfinder when
shooting in [Continuous Shooting: Hi+] mode.
• The speed of continuous shooting decreases when shooting in uncompressed
RAW.
• The speed of continuous shooting decreases when you shoot with a flash.