SERVICE MANUAL
Sony Corporation
Audio Business Group
Published by Sony Techno Create Corporation
AIR-SA10
SPECIFICATIONS
WIRELESS SPEAKER SYSTEM
9-887-984-01
2008B05-1
©
2008.02
US Model
Canadian Model
Ver. 1.0 2008.02
Amplifi er section
U.S.A. model:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohm loads, both channels driven, from 300 –
20,000Hz; rated 4 watts per channel minimum RMS
power, with no more than 10% total harmonic distor-
tion from 250 milliwatts to rated output.
Other models:
Continuous RMS power output (reference):
4 + 4 W (3 ohms at 1 kHz, 10% THD)
Output
i (stereo mini jack): Accepts headphones with an im-
pedance of 8 ohms or more
Speaker section
Speaker system: Full range, bass-refl ex type
Speaker units: 65 mm, cone type (2)
Nominal impedance: 3 ohms
Wireless transceiver (EZW-RT10)
Communication System: S-AIR Specifi cation version
1.0
Output: 12.0 mW
Frequency band: 2.4000 GHz – 2.4835 GHz
Modulation method: DSSS
Power requirements: DC 3.3 V, 350 mA
Dimensions (w/h/d): 50 mm × 13 mm × 60 mm
(2 ×
17
/32 × 2
3
/8 in)
Mass: 24 g (1 oz)
General
Power requirements:
North American model: 120 V AC, 60 Hz
Power consumption: 15 W
Dimensions (w/h/d): Approx. 300 × 136 × 115 mm
(11
7
/8 × 5
3
/8 × 4
5
/8 in)
Mass: Approx. 2.2 kg (4 lb 14 oz)
Supplied accessories: Wireless transceiver EZW-
RT10 (1)
Design and specifi cations are subject to change with-
out notice.
To Next Page
