Sony BC-TRX - Troubleshooting; Battery Pack Cannot Be Charged; Device Connected by USB Cable Not Working

Troubleshooting
When the CHARGE lamp blinks, check through the following chart.
The
CHARGE
lamp
blinks
in
two
ways.
Blinks slowly: Turns on and off repeatedly every
1.5
seconds
Blinks quickly: Turns on and off repeatedly every 0.15
seconds
The action to be taken depends
on
the way the CHARGE lamp blinks.
When
the
CHARGE
lamp
keeps
blinking slowly
Charging
is
pausing. This unit
is
in the standby state.
If
the room temperature
is
out
of
the appropriate temperature range,
charging stops automatically.
When
the room temperature returns to the appropriate range, the
CHARGE lamp lights up and charging restarts.
We
recommend charging the battery pack at
10
octo
30
oc
(50
oF
to
86
°F).
When
the
CHARGE
lamp
keeps
blinking quickly
When
charging the battery pack for the first time in one
of
the
following situations, the CHARGE lamp may blink quickly.
If this happens, remove the battery pack from this unit, reattach it and
charge it again.
G)
When
the battery pack is left for a long time
®
When
the battery pack
is
left installed in the camera for a long time
®
Immediately after purchase
If the CHARGE lamp keeps blinking quickly, check through the following
chart.
I
Remove the battery pack that
is
being charged
and
then firmly attach the same
battery pack again.
+
1
I
The
CHARGE
lamp
blinks
again:
I
The
CHARGE
lamp
lights
up
and
Install another battery pack.
does
not
blink
again:
If the CHARGE lamp goes out
because the charging time has
passed, there
is
no problem.
+
I The
CHARGE
lamp
blinks
again:
I
The
CHARGE
lamp
lights
up
and
The problem
is
with this unit.
does
not
blink
again:
If the CHARGE lamp goes out
because the charging time
has
passed, the problem
is
with the
battery pack first installed .
•
I
Please
contact your nearest Sony dealer in connection with the product that may
have a problem.
The
battery
pack cannot
be
charged.
•
This unit
is
not connected to the wall outlet (wall socket).
--+Connect
this unit to the wall outlet (wall socket) properly.
• The output switch
of
this unit is set to
"USB POWER 5V
1500mA".
--+ Set the output switch
of
this unit to "BATTERY CHARGE':
•
Battery pack
is
attached at an angle
or
upside down.
--+
Attach the battery pack to this unit correctly.
The device connected
by
the
USB
cable
does
not
work.
•
This unit
is
not connected to the wall outlet (wall socket).
--+Connect
this unit to the wall outlet (wall socket) properly.
• The output switch
of
this unit
is
set to
"BATTERY CHARGE".
--+Set
the output switch
of
this unit to
"USB POWER 5V 1500mA':
•
The device connected to this unit may need to be operated.
--+
Refer to the instruction manual
of
the connected device.
Specifications
Input rating
Output
rating
100
V-
240 V
AC
50Hz/60Hz
llW
Battery charge terminal:
4.2
V
DC
860
rnA (BATTERY CHARGE)
5.0
V
DC
1,500 rnA
(USB POWER
5V
1500mA)
Operating temperature
0
octo
40
oc
(32
°F
to 104
°F)
Storage temperature
-20
oc
to
+60
oc
(
-4
oF
to +
140
°F)
Dimensions (Approx.)
54
mm
x
45
mm
x
90
mm
(w/h/d)
(2
1/4 inches x 1 13/16 inches x 3 5/8 inches)
Mass Approx.
105
g (3.7 oz)