49
Settings and Adjustments
System Settings
The default settings are underlined.
Selects your language for the player on-
screen displays.
Adjusts the lighting of the front panel display.
b
When “Standby Mode” is set to “Quick Start,”
– power consumption will be higher than when
“Standby Mode” is set to “Normal” and
– the ventilation fan may turn on depending on the
surrounding temperature.
The screen saver image appears when you do
not use the player for more than 15 minutes
while an on-screen display, such as the home
menu, is displayed on your TV screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
Informs you of newer software version
information. Network connections and
settings are required when using this function
(page 50).
Displays the player’s software version
information and the MAC address.
OSD
Dimmer
Bright Bright lighting.
Dark Low lighting.
Off Turns off the lighting during
playback. Low lighting other
than during playback.
Control for HDMI
On Allows you to use the
“Control for HDMI”
function (page 16).
Off
Turns off the function.
Standby Mode
Quick Start Shortens the startup time
from standby mode. You can
operate the player quickly
after turning it on.
Normal
The default setting.
Auto Display
On Automatically displays
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off Displays information only
when you press DISPLAY.
Screen Saver
On Turns on the screen saver
function.
Off Turns off the function.
Software Update Notification
On Sets the player to inform you
of newer software version
information (page 40).
Off Turns off the function.
System Information
To Next Page
Loading...
