EasyManua.ls Logo

Sony BDP-S4100 - Audio Settings; Digital Audio Output Modes; DSD and Super Audio CD Output; BD Audio Mixing Options

Sony BDP-S4100
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
[Ajustes de audio]
x [Salida de audio digital]
[Automático]: Normally select this.
Outputs audio signals according to the
status of the connected devices.
[PCM]: Outputs PCM (pulse code
modulation) signals from the DIGITAL
OUT (COAXIAL)/HDMI OUT (high-
definition multimedia interface out)
jack.
x [Modo de salida DSD]
[Activar]: Outputs DSD (direct stream
digital) signals from the HDMI OUT
(high-definition multimedia interface
out) jack when playing a Super Audio
CD (super audio compact disc). When
[Activar] is selected, no signal is output
from other jacks.
[No]
: Outputs PCM (pulse code
modulation) signals from the HDMI
OUT (high-definition multimedia
interface out) jack when playing a Super
Audio CD (super audio compact disc).
x [Ajuste de MIX audio BD]
[Activar]: Outputs the audio obtained by
mixing the interactive and secondary
audio to the primary audio.
[No]: Outputs the primary audio only.
Select this to output HD (high definition)
audio signals to an AV (audiovisual)
amplifier (receiver).
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the
simulated multi-channel sound from 2
channel sources via the HDMI OUT
(high-definition multimedia interface
out) jack according to the capability of
the connected device using DTS Neo:6
Cinema or DTS Neo:6 Music mode.
[No]
: Outputs the sound with its original
number of channels via the HDMI OUT
(high-definition multimedia interface
out) jack.
x [Audio DRC]
[Automático]: Performs playback at the
dynamic range specified by the disc
(BD-ROM (Blu-ray Disc read-only
memory) only). Other discs are played
back at the [Activar] level.
[Activar]: Performs playback at a
standard compression level.
[No]: No compression works. A more
dynamic sound is produced.
x [Mezcla]
[Envolventes]: Outputs audio signals
with surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
(digital theater systems) Neo:6.
[Estéreo]
: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS (digital theater systems) Neo:6.