Network （Network Test: Ping）
Outline
Ping Test for the wired Ethernet.
(Window 1)Ping Test
Operation:
[LEFT] Select Ifconfig Test.
[DOWN] Ping execution preparation.
[RET] Return to Service Top Menu.
(Window 2) The IP address of the Ping point is set up.
（
IP address input mode）
When “Ping to :>” is reversed, [ENT] is pushed and IP is inputted.
Operation:
[ENT] Finish to input.
[RET] Finish to input.
[LEFT] Finish to input and Select Ifconfig Test.
[(NUM)] Input Character sting ‘0-9’
[TIME] Input Character sting ’.’
[CLEAR] Backspace
(Windows3): Ping Test Active
When [START] is reversed, [ENT] is pushed and execute ping .
Operation:
[ENT] Activate Ping Test
[UP] The IP address of the Ping point is set up.
[RET] Return to Service Top Menu.
Front Panel Display
S-NET
(
g
(
)
t
r
t
f f
>
(
w
)
w r
t r
t
F
7-13
BX58/S480/S483/S580
To Next Page
