13
Hookups and Settings
b
Do not connect the player through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
Select one of the following connection methods according to the input jacks on your AV
amplifier (receiver). When you select A or B, make the appropriate settings in the “Audio
Settings” setup (page 24).
Connecting to your AV amplifier (receiver)
HDMI cable
(not supplied)
t Set “BD Audio MIX Setting” (page 24).
HDMI cable
(not supplied)
Coaxial digital cable (not supplied)
t Set “Dolby Digital (Coaxial / Optical)
*1
” (page 24)
and “DTS (Coaxial / Optical)
*2
” (page 24).
Optical digital cable (not supplied)
or
Audio/video cable (supplied)
,continued
To Next Page
Loading...
