Sony BDV-E670W - Specifications; Subwoofer

74
GB
Specifications
Amplifier Section
POWER OUTPUT (rated)
Front L + Front R: 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R/Center: 167 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 W (at 3 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN) Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL), TV (OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
Video Section
Outputs VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19
pin)
BD/DVD/Super Audio CD/CD System
Signal format system PAL/NTSC
USB Section
(USB) port: Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Maximum current: 500 mA
LAN Section
LAN (100) terminal 100BASE-TX Terminal
Tuner Section
System PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range 87.5 MHz - 108.0 MHz
(50 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Speakers
Front/Surround (SS-TSB101) for BDV-
E670W
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 225 mm × 71 mm
(w/h/d)
Mass (approx.) 0.45 kg
Front (SS-TSB103) for BDV-E970W
Speaker system 2-Way 2-Driver Bass
reflex
Speaker unit Tweeter: 20 mm cone type
Woofer: 55 mm × 80 mm
cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 610 mm × 70 mm
(w/h/d) (wall-mounted
part)
251 mm × 1,205 mm × 251
mm (w/h/d) (whole
speaker)
Mass (approx.) 1.0 kg (wall-mounted part)
2.8 kg (whole speaker)
Center (SS-CTB101)
Speaker system Full range Acoustic
suspension, Magnetically
Shielded
Speaker unit 30 mm × 60 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 290 mm × 49 mm × 49 mm
(w/h/d)
Mass (approx.) 0.28 kg
Surround (SS-TSB104) for BDV-E970W
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 610 mm × 70 mm
(w/h/d) (wall-mounted
part)
251 mm × 1,205 mm × 251
mm (w/h/d) (whole
speaker)
Mass (approx.) 0.9 kg (wall-mounted part)
2.7 kg (whole speaker)
Subwoofer (SS-WSB102)
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 275 mm × 405 mm × 275
mm (w/h/d)
Mass (approx.) 7.5 kg
General
Power requirements
Taiwan models: 120 V AC, 50/60 Hz
Other models: 220 V - 240 V AC,
50/60 Hz
Power consumption On: 130 W