Sony BDV-HZ970W Speaker Installation Guide

2
Thread the speaker cord () into the bottom of the post ( or ) and
out the opposite end.
You can choose either the long posts () or the short posts () to assemble the
speakers.
Screw holes



or

3
Thread the speaker cord () through the hole on the bottom of the
speaker () and out the hole on the rear.


4
Insert the post ( or ) into the hole on the bottom of the speaker
(), so that the screw on the top of the post faces the front of the
speaker.
Screw
 or 

5
Secure the post ( or ) with the screws ().

 or 
6
Connect the speaker cord (). Then, secure the speaker cord by running
it through the slit.
Connect the speaker cord with the colored tube to , and the speaker cord without the
colored tube to .
Colored
tube
Slit

Label
Note
Match the color of the tube and label.
Continued

Speaker Installation
Guide
4-187-308-11(1)
BDV-HZ970W
© 2010 Sony Corporation Printed in Malaysia
(1)
Assembling the front speakers
Required parts

×2 ×2 ×8
 
×2
Front speaker (R):
with red colored tube
Front speaker (L):
with white colored tube
×2×2
1
Thread the speaker cord () through the bottom hole in the base
().


Colored tube

Sony BDV-HZ970W Specifications

Power

power output - surround	167W x 2 (RMS 10%THD)
power requirements	120V AC, 60Hz
power consumption (in standby)	0.3W
total power output	1000W Total (RMS)
center power output	167W
surround power output	167W
woofer power output	165W
front power output	60W

Inputs and Outputs

hdmi connection input(s)	2 Inputs
hdmi connection output(s)	1 Output
optical audio input(s)	1 (TV)
analog audio input(s)	2 (AUDIO TV)
coaxial audio input(s)	1 (Sat/Cable)
component video (Y/Pb/Pr) output(s)	1
composite video output(s)	1
speaker terminal	2 (Front); 1 (Center); 2 (Surround); 1 (Subwoofer)

Weight and Dimensions

amplifier dimensions	17 in × 3 3/8 in × 14 1/8 in (430 mm × 83 mm × 355 mm)
front speakers without stands dimensions	3 in × 24 1/16 in × 2 7/8 in (75 mm × 610 mm × 70 mm)
front speakers with desktop stands dimensions	9 7/8 in × 28 5/8 in × 9 7/8 in (250 mm × 727 mm × 250 mm)
front speakers with floor stands dimensions	9 7/8 in × 39 3/8 in × 9 7/8 in (250 mm × 1000 mm × 250 mm)
surround speakers dimensions	3 in × 8 7/8 in × 2 7/8 in (75 mm × 225 mm × 71 mm)
center speaker dimensions	11 1/2 in × 1 15/16 in × 1 15/16 in (290 mm × 49 mm × 49 mm)
subwoofer dimensions	10 7/8 in × 16 in × 10 7/8 in (275 mm × 405 mm × 275 mm)
amplifier weight	10 lb 10 oz (4.8 kg)
front speakers weight	2 lbs (0.9 kg)
surround speakers weight	1 lb (0.45 kg)
center speaker weight	10 oz (0.28 kg)
subwoofer weight	16 lb 12 oz (7.5 kg)