This document is a reference guide for Sony BRAVIA Televisions, specifically models KDL-50W667G, KDL-43W667G, and KDL-32W617G. It provides essential information for installation, operation, troubleshooting, and technical specifications.
Function Description
The Sony BRAVIA Television is a display device designed for viewing various media content, including broadcast television, video from external devices, and online streaming services. It features an LCD panel with LED backlighting for picture display and integrated speakers for audio output. The television supports both analog and digital broadcast systems (ISDB-T) and offers multiple input/output options for connecting a wide range of peripheral equipment. Its smart TV capabilities allow access to online services like YouTube and Netflix (in limited regions/countries/TV models). The TV can be operated via a supplied remote control or on-board controls.
Important Technical Specifications
System:
- Panel System: LCD (Liquid Crystal Display) Panel, LED Backlight
- TV System: Analog: M; Digital: ISDB-T
- Color/Video System: Analog: PAL (Video only)/SECAM (Video only)/NTSC3.58/NTSC4.43 (Video only); Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4.0
- Channel Coverage: Analog: UHF/VHF/Cable; Digital: UHF/VHF
- Sound Output (Only for 19.5 V supply): 5W + 5W
- Wireless Technology: Protocol IEEE802.11b/g/n
- Antenna/Cable: 75 ohm external terminal for VHF/UHF
- VIDEO IN: Video input (phono jack)
- AUDIO IN: Audio input (phono jacks)
- HDMI IN 1/2 (HDCP 1.4-compatible):
- Video: 1080p (30, 50, 60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i
- Audio: Two channel linear PCM: 32/44.1/48 kHz 16/20/24 bits, Dolby Digital, Dolby Digital Plus, DTS
- ARC (Audio Return Channel) (HDMI IN 1 only): Two channel linear PCM: 48 kHz 16 bits, Dolby Digital, Dolby Digital Plus, DTS
- DIGITAL AUDIO OUT (OPTICAL): Digital optical jack (Two channel linear PCM: 48 kHz 16 bits, Dolby Digital, DTS)
- AUDIO OUT (Stereo mini jack): Headphone, Audio output, Subwoofer
- USB 1, 2: USB port 1 and 2 support High Speed USB (USB 2.0)
- DC IN 19.5 V: AC adapter input
- LAN: 10BASE-T/100BASE-TX connector
Power and Others:
- Power Requirements: 19.5 V DC with AC adapter; Rating: Input 100 V – 240 V AC, 50/60 Hz
- Screen Size (measured diagonally) (Approx.):
- KDL-50W667G: 50 inches / 125.7 cm
- KDL-43W667G: 43 inches / 108.0 cm
- KDL-32W617G: 32 inches / 80.0 cm
- Power Consumption:
- KDL-50W667G: 117 W
- KDL-43W667G: 60 W
- KDL-32W617G: 60 W
- Standby Power Consumption: 0.5 W (increases when connected to network)
- Display Resolution:
- KDL-50W667G / 43W667G: 1,920 pixels (horizontal) × 1,080 lines (vertical)
- KDL-32W617G: 1,366 pixels (horizontal) × 768 lines (vertical)
- Output Rating USB 1/2: 5 V, 500 mA MAX
- Dimensions (Approx.) (w × h x d):
- With Table-Top Stand:
- KDL-50W667G: 1,130 × 719 × 268 mm
- KDL-43W667G: 974 × 628 × 268 mm
- KDL-32W617G: 731 × 493 × 206 mm
- Without Table-Top Stand:
- KDL-50W667G: 1,130 × 660 × 68 mm
- KDL-43W667G: 974 × 572 × 68 mm
- KDL-32W617G: 731 × 442 × 70 mm
- Mass (Approx.):
- With Table-Top Stand:
- KDL-50W667G: 11.4 kg
- KDL-43W667G: 8.2 kg
- KDL-32W617G: 6.1 kg
- Without Table-Top Stand:
- KDL-50W667G: 11 kg
- KDL-43W667G: 7.8 kg
- KDL-32W617G: 5.8 kg
- Operating Temperature: 0 °C - 40 °C
- Optional Accessories: Wall-Mount Bracket: SU-WL450
- HDR (High Dynamic Range) Notes: Compatible with all HDR PS4 Game titles via HDMI and HDR videos of built-in Netflix and YouTube App only. HDR image signal specifically means HDR10 Media Profile format. Compatibility with all HDR content is not guaranteed.
Usage Features
Installation and Setup:
- The TV should be installed near an easily accessible AC power outlet.
- It must be placed on a stable, level surface to prevent falling.
- The Table-Top Stand should not protrude from the TV stand (if applicable).
- Wall-mount installations should only be carried out by qualified service personnel using Sony accessories like the SU-WL450 Wall-Mount Bracket.
- Screws supplied with the Wall-Mount Bracket must be used, and unused screws/Table-Top Stand should be stored safely away from children.
Remote Control Operation:
- Power (U): Turns the TV on/off. Press repeatedly to change function (volume, channel, input source).
- Number buttons (0-9): Selects digital channels.
- Text ( ): Displays text information.
- Color buttons: Executes corresponding functions.
- YouTube/NETFLIX: Direct access to online services (limited regions/models).
- Info/Text reveal ( ): Displays information.
- SLEEP: Sets a sleep timer (15, 30, 45, 60, 90, 120 minutes) to automatically turn off the TV.
- GUIDE ( ): Displays the Digital EPG (Electronic Program Guide).
- RETURN: Returns to the previous screen.
- OPTIONS: Displays a list of shortcuts to setting menus.
- HOME: Displays the TV Home Menu.
- Navigation D-pad ( / / / ): On-screen menu navigation and selection.
- Volume (+/-): Adjusts volume.
- Mute ( ): Mutes/unmutes sound.
- CH/PROG (+/- / ): Selects channels (TV mode) or next/previous page (Text mode).
- AUDIO: Selects multilingual or dual sound for programs.
- CC/ (Subtitle): Turns subtitles on/off.
- Wide Mode ( ): Adjusts screen display.
- Media Control Buttons ( / / / / / / ): Operates media content on TV and connected BRAVIA Sync-compatible devices, also used for VOD service playback.
- Jump ( ): Returns to the previous channel or input viewed more than 15 seconds ago.
- Input select/Text hold ( / ): Displays/selects input source (TV mode) or holds current page (Text mode).
- EXIT: Returns to previous screen or exits menu/Interactive Application service.
- SYNC MENU: Displays the BRAVIA Sync Menu.
On-board Controls (KDL-50W667G / 43W667G):
- Power (U) / +/-: Functions similar to the remote control for power, volume, channel, and input selection.
- Remote Control Sensor / LED Indicator: Lights up or blinks according to TV status. Do not place anything near the sensor.
On-board Controls (KDL-32W617G):
- Power (U) / +/-: Functions similar to the remote control for power, volume, channel, and input selection.
- Remote Control Sensor / LED Indicator: Lights up or blinks according to TV status. Do not place anything near the sensor.
Connectivity:
- USB Ports: Connect USB storage media, digital still cameras, or camcorders. For large USB devices, connect to USB 1.
- HDMI Inputs: Connect HDMI devices. HDMI IN 1 supports ARC (Audio Return Channel) for routing TV audio to an audio system via the same HDMI cable. If ARC is not supported, an additional DIGITAL AUDIO OUT (OPTICAL) connection is needed.
- Audio Out: Supports 3-pole stereo mini jack for headphones, audio systems, or subwoofers. To enable sound through connected equipment, adjust settings in [Preferences] -> [Setup] -> [AV Setup] -> [Headphone/Audio Out].
- Digital Audio Out (Optical): Connects to audio systems for digital audio output. Note: Do not plug in the digital audio connector adapter if not connected to an optical audio cable to disable the red LED light.
- LAN: Connects to a network for online services.
Troubleshooting:
- LED indicator flashing red: Count flashes, disconnect AC power for two minutes, then reconnect. If persistent, contact service.
- No picture/sound: Check antenna/cable, AC power, and power button on TV/remote.
- Picture contours distorted: Adjust [CineMotion] settings.
- TV turns off automatically: Check [Sleep Timer], [Duration] (On Timer/Photo Frame Settings), or [Idle TV Standby] settings.
- Input sources cannot be selected: Check [Manage Inputs] and select [Always] for the desired input.
- Program cannot be tuned: Check antenna/cable connection.
- Remote control not functioning: Replace batteries.
- TV surrounds become warm: Normal during extended use.
Maintenance Features
General Care:
- Before unplugging the AC power cord, ensure the TV is completely turned off.
- To completely disconnect from AC power, pull the plug from the mains socket.
- When performing input selection, allow a moment for the TV to switch inputs.
Transporting the TV:
- Disconnect all cables before transporting.
- Two or three people are needed for large TVs.
- Hold the TV as shown in the manual, avoiding stress on the LCD panel and frame.
- When lifting/moving, hold it firmly from the bottom.
- Avoid jolts or excessive vibration.
- For repairs or moving, pack the TV using the original carton and packing material.
Detaching the Table-Top Stand:
- If the Table-Top Stand is attached, detach it by following the reverse order of the setup guide.
- Place the TV screen-down on a level, stable surface covered with a thick, soft cloth to prevent damage to the LCD display.
Topple Prevention:
- The manual illustrates how to secure the TV to a stand or furniture using an M6 screw (not supplied) and a cord (not supplied) to prevent toppling.
Customer Support:
- For customer support and contact, refer to http://www.sony-asia.com/support.
- For detailed information, access the Help Guide via the HOME button on the remote control under [Settings] menu, or from a PC/smartphone using the provided URL (http://rd1.sony.net/help/tv/gphl4/h_ph/).
Need help?
To Next Page
General