Why is my Sony Bravia KDL-52WL130 remote control not working?
If your Sony LCD TV remote control isn't working, consider these potential solutions: * Verify the batteries are correctly inserted or replace them. * Aim the remote at the sensor on the front of the TV. * Turn off any fluorescent lamps that may be causing interference. * Ensure nothing is blocking the remote control sensor.
Why does my Sony Bravia KDL-52WL130 LCD TV keep turning off?
If your Sony LCD TV turns off unexpectedly, check if the Sleep Timer is activated, or confirm the Duration setting of Timer automatically. Also, check PC Power Management in the General Settings.
How do I reset my Sony LCD TV to factory settings?
Turn on the TV. While holding down V on the remote control, press POWER (The TV will turn itself off, then back on again.) Release V. WARNING: The Reset will clear all of your customized settings including the Parental Lock setting.
How to fix 'Cannot receive any channels' on Sony Bravia KDL-52WL130 LCD TV?
If your Sony LCD TV cannot receive any channels, ensure the following: * The power cord is securely connected. * The TV is powered on. * Antenna/cable connections are properly connected. * The Cable setting is correct for your TV signal source.
Why does my Sony Bravia KDL-52WL130 LCD TV have no color or a dark picture?
If your Sony LCD TV picture has no color, is dark, or is too bright, try these solutions: * Press PICTURE to select the desired Picture Mode. * Adjust the Picture Mode options in the Picture settings. * If Power Saving is set to Low or High, it will enhance the black level.
What to do if Sony LCD TV cannot receive or select channels?
If your Sony LCD TV cannot receive or select channels, try the following: * Perform Auto Program to add receivable channels that are not present in the TV’s memory. * To receive or select cable channels, make sure that Cable in the Channel settings is set to On. To receive or select UHF channels over an antenna, make sure Cable is set to Off.
How to eliminate audio noise on Sony Bravia KDL-52WL130?
To eliminate audio noise on your Sony LCD TV: * Make sure that the antenna is connected using the 75-ohm coaxial cable (not supplied). * Keep the antenna cable away from other connecting cords. * To avoid TV interference, make sure to use an undamaged antenna cable.
What to do if my Sony LCD TV shows 'No Picture / No Signal' from PC?
If your Sony LCD TV displays 'No Picture / No Signal' when connected to a PC: * Confirm the PC is correctly connected to the TV with either the PC IN (with HD15-HD15 cable with ferrite core (not supplied)) or with the HDMI IN. * Ensure the output signal from the PC is one of the formats listed on page 16. * Turn the PC off, confirm the PC connection, and restart the PC. Plug and play will auto-detect the TV and correctly set up PC timing. * Verify PC Power Management is activated.
Why are some digital cable channels not being displayed on my Sony Bravia KDL-52WL130 LCD TV?
If some digital cable channels are not being displayed on your Sony LCD TV: * Certain cable companies have limitations on the broadcast of digital cable channels. Check with your cable company for more information. * The digital cable channel may be set to Hidden in the Show/Hide Channels setting.
What to do if my Sony Bravia KDL-52WL130 has picture but no sound?
If your Sony LCD TV has a good picture but no sound, try the following: 1. Check the volume control. 2. Ensure 'Muting' is off by pressing MUTING or VOL +. 3. Disconnect any headphones. 4. In the Audio Options settings, set Speakers to TV Speakers. If it is set to Audio System, sound will not come from the TV’s speakers. 5. When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL OUT (Optical) may not provide an audio signal.
Display| native resolution | 1080p |
|---|---|
| contrast ratio (dynamic) | 18, 000:1 |
| contrast ratio (on-screen) | 2, 000:1 |
Power| power consumption (operation) | 295W |
|---|---|
| power consumption (standby) | Less than 0.4W |
| energy star compliant | Yes |
Inputs and Outputs| analog audio inputs | 5 (4 Rear/1 Side) |
|---|---|
| component video inputs | 2 (Rear) |
| composite video inputs | 3 (2 Rear/1 Side) |
Weight and Dimensions| weight with pedestal | 43.0 kg |
|---|---|
| measurements with pedestal | 1278 x 874 x 384 mm |
| measurements without pedestal | 1278 x 832 x 123 mm |
Covers AC power cord, electrical safety, lightning, and general warnings.
Covers antennas, batteries, cleaning, magnetic influence, sound, and carrying precautions.
Covers ventilation, moisture, installation, and placement guidelines.
Covers broken parts, glass handling, servicing, replacement parts, and US customer information.
Explains the benefits of HD programming and picture quality differences.
Introduces the XMB interface for accessing TV features and settings.
Guides on setting up the TV, preventing toppling, and wall-mounting.
Details TV ports and connection guides for various devices on the left and rear.
Provides instructions for connecting antenna, cable boxes, PCs, and other equipment.
Covers initial setup, auto program, and channel management for analog and digital signals.
Explains remote layout, indicators, and battery insertion.
Explains how to program the remote for various devices.
Explains how to operate connected devices using the TV remote.
Details P&P and PIP functionality.
Guides on accessing and navigating the XMB interface for TV features and settings.
Covers Picture Modes, Sound Modes, and Screen aspect ratios.
Covers channel management, closed captions, and parental lock.
Covers external inputs, HDMI control, and general TV configurations.
Provides solutions for no picture, no sound, poor picture quality, and remote control problems.
Addresses problems with remote operation and non-Sony equipment.
Lists technical specifications, dimensions, and supplied/optional accessories.
To Next Page
