22
US
To detach the Table-Top Stand from the TV, remove the screws .
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the
TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV
wi
th the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
o
riginal holes on the rear of the TV.
Changing the cable management (XBR-55X890C, XBR-55X850C, XBR-49/
43X830C)
Detaching the Table-Top Stand from the TV
To Next Page
Loading...
Need help?
General