EasyManua.ls Logo

Sony CCD TRV 10 E - Trouble Check: Camcorder Issues; Camcorder Picture Issues; Camcorder Other Issues

Sony CCD TRV 10 E
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Symptom Cause and/or Corrective Actions
• Reset the date and time. (p.45)
• START/STOP MODE switch is set to or 5 SEC.
m Set it to . (p.36)
Picture
Symptom Cause and/or Corrective Actions
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p.14)
• The contrast between the subject and background is
too high. The camcorder is not malfunctioning.
m Change locations.
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH cleaning cassette.
(p.52)
• The LCD panel is open.
m Close the LCD panel. (p.18)
• Incorporated fluorescent tube is worn out.
m Please contact your nearest Sony dealer.
• The camcorder is not malfunctioning.
• The camcorder operates in Demo mode.
m Exit the Demo mode. (p.72)
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m Set it to ON. (p.39)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p.70)
• The batteries are dead.
m Insert new ones. (p.70)
• Detach the eyecup and clean the viewfinder lens. (p.53)
The date or time indicator
disappears.
Recording stops in a few
seconds.
The image on the viewfinder
screen is not clear.
A vertical band appears when
a subject such as lights or a
candle flame is shot against a
dark background.
The picture is “noisy”.
The picture does not appear
in the viewfinder.
The picture does not appear
on the LCD screen.
A vertical band appears when
shooting a very bright subject.
An unknown picture is displayed.
The supplied Remote
Commander does not work .
There is dust in the viewfinder.
Trouble check

Table of Contents

Related product manuals