Need help?Do you have a question about the Sony CDP-X3000ES and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Total Harmonic Distortion | 0.0018% |
| Dimensions | 445 x 100 x 320 mm |
| Weight | 4.5 kg |
| Disc format | CD, CD-R, CD-RW |
| Digital converter | Bitstream |
| Dynamic range | 100 dB |
| Line output | 2 V |
| Digital outputs | Coaxial, Optical |
| Year | 1994 |
| Channels | 2 |
| Output Voltage | 2 V |
| Output | 2V |
Critical components identified for safety. Replace with specified parts only.
Precautions for preventing ESD damage to the optical pick-up.
Procedure for setting auto gain data for focus and tracking.
Procedures for removing the sled motor and optical pick-up.
How to perform the S-curve check for focus.
Procedure for checking E-F balance and traverse waveform.
Guide for setting auto gain data for focus and tracking.
Electrical circuit schematic for the servo section.
Electrical circuit schematic for the audio section.
Electrical circuit schematic for the control section.
To Next Page
