Sony CECH-2501A - Initial System Connections: Network and Power; Ethernet and AC Power Cord Setup

14
Getting started
CECH-2501A 4-198-819-11(1) US


Connect an Ethernet cable (sold separately)
Use an Ethernet cable to connect the system to the Internet.
Hint
You can use a wireless network connection to connect to the Internet without using an Ethernet cable.
For details, see "Adjusting network settings" (
page 28).
Caution
Do not connect a standard telephone line or other types of cords or cables that are not compatible
with the system directly to the LAN connector on the system, as this may cause heat build-up, fire
or malfunction.

Connect the AC power cord
After plugging the AC power cord into the electrical outlet, the power indicator on the
PS3™ system will light up in solid red ( page 21).
Caution
Do not plug the AC power cord for the system into an electrical outlet until you have made all other
connections. Make sure the TV or other component is unplugged from the electrical outlet prior to
connecting it to the system.

LAN connector AC IN connector
Perfo
After tur
1 Turn
mat
2 Pres
The
scre
e
3 Con
cab
4 Pres
The s
the in