Sony CMT-SE1 - Getting Started; Hooking up the System

4
GB
Perform the following procedures 1 to 3 to hook up your system using the supplied cords and
accessories.
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Note
To prevent noise pickup, keep the antennas away from
the system and other components.
3 Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
Getting Started
Hooking up the system
1
2
3
AM loop antenna
Right speaker
Left speaker
FM lead antenna
R
IM
PED
AN
C
E
U
SE
4
Ω
L
S
PE
AKE
R
A
M
C
O
A
X
IA
L
F
M
75
Ω
Extend the FM lead antenna horizontally
AM loop antenna