/
Cannot copy the data on the "Memory Stick Duo" or the computer to the
internal memory,
• D:_I.on a 'Memory Stick Duo" or :Jcomputer cmmot he copied to the intern.l memory.
Also see "PictBridge compliant printer" (as follows) in coi3junction with the following items.
Images are printed with both edges cut off.
• When you print _,n image shot _xith the im*,ge size set to 116:c;I, hoda edges of the im*,ge m*,y
be cut off.
• When printing images using your own winter, try canceling the trimming or borderless
settings. Consult the printer manufi_cmrer as to whether the printer provkles these fimctions or
not.
• When h,', ing images printed at a digital print shop, ask the shop whether they can print the
images wiflaout cutting off both edges.
A connection cannot be established.
• The camera Calmot be connected directly to t, printer th,t is not complimlt _xith the•PictBridge
standard. Consult the printer manufacturer as to x_hether the printer ix compliant x_ith
PictBridge or not.
• Check Ilmt the printer is turned on and can be connected to the cmnera.
• Set [USB Connect] to [PictBridge] in the _ (Setup) menu (page 67).
• Disconnect the USB c_hle, and connect it _gain. If an error message is indicated on the
printer, refer to the operating instlUCtlOnS supplied x_ith the printer.
Cannot print images.
• Check the USB cane is connected correctly.
• Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
• If you select [Exit] during printing, images m,y not print. Disconnect and connect the USB
c_hle again. If you still cannot print your images, disconnect the cable, turn the printer off and
then on, then connect the cable again.
• Movies cannot be printed.
• hnages shot using cameras other than this camera or images modified with a computer inlay
not be printed.
Printing is canceled.
• Youdisconnected the USB cable belk>rethe @ PictBridge Connecting mark disappears.
102
To Next Page
Loading...
