Sony Cyber-shot DSC-HX99 User Manual

Help Guide
Digital Still Camera
DSC-HX99
Connecting to a computer
Note
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.
Related Topic
USB Connection
USB LUN Setting
4-745-578-11(1) Copyright 2018 Sony Corporation
Insert a sufficiently charged battery pack into the camera.
1
Turn on the camera and the computer.
2
Check that [USB Connection] under
(Setup) is set to [Mass Storage].
3
Connect the camera to the computer using the micro USB cable (supplied) (A).
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the micro USB cable when [USB Power Supply] is set to
[On], power is supplied from your computer. (Default setting: [On])
4
305

Sony Cyber-shot DSC-HX99 Specifications

General

Effective Pixels	18.2 MP
Lens	ZEISS Vario-Sonnar T*
Optical Zoom	28x
Maximum Aperture	f/3.5-6.4
Image Stabilization	Optical SteadyShot
Dimensions	102.0 x 58.1 x 35.5 mm
Connectivity	Wi-Fi, NFC, Bluetooth
Battery Type	NP-BX1
Sensor Type	1/2.3" Exmor R CMOS sensor
ISO Sensitivity	80-3200 (expandable to 3200)
Shutter Speed	4-1/2000 sec
LCD Screen	3.0" tilting LCD screen
Viewfinder	0.2" OLED electronic viewfinder
Video Recording	4K UHD
Battery Life	Approx. 370 shots
Weight	242 g (with battery and memory card)
Storage Media	Memory Stick Duo, SD/SDHC/SDXC
Focal Length	f = 4.25-118mm