Digital Still Camera
DSC-QX10/QX100
Charging the battery pack
If the Charge lamp of the camera flashes during charging, remove the battery pack being charged, and
then insert the same battery pack into the camera securely again. If the Charge lamp flashes again,
this may indicate a battery error or that a battery pack other than the specified type has been inserted.
Check that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or different one
and check that the battery is charged correctly. If the battery is charged correctly, a battery error may
have occurred.
If the Charge lamp flashes, this indicates that charging has stopped temporarily and is on standby.
When the temperature returns to the appropriate range, charging resumes the Charge lamp lights up
again. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C
(50°F to 86°F).
Notes on use
4-477-311-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to use
To Next Page
Loading...
