Sony Cyber-shot DSC-RX0 - Initial Camera Setup and Operations; Setting Language and Clock

GB
21
Setting the language and the clock
1
Press the 1 (On/Standby) button.
Language setting screen is displayed when you turn on the camera for the
first time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language, then press the z (Enter)
button.
Date & Time setting screen is displayed.
3
When the message [Set Area/Date/Time.] is displayed,
select [Enter] and press the z (Enter) button.
4
Select a desired geographic location by following the
on-screen instructions, then press the z (Enter) button.
5
Set [Daylight Savings], [Date/Time] and [Date Format],
then press the z (Enter) button.
• When setting [Date/Time], midnight is 12:00 AM, and noon is
12:00 PM.
6
Check that [Enter] is selected, then press the z (Enter)
button.
Up button
z (Enter) button
Select items: Up button/down button/left button/right button
Set the numeric value of date and time: Up button/down button
Set: z (Enter) button
Left button
Down button
Right button