DSC-RX100M6
4-737-810-11(1)
GB
17
C:\4737810111\4737810111DSCRX100M6UC2\01GB-DSCRX100M6UC2\020PRE.indd
DTP data saved: 2018/02/06 16:03
PDF file created: 2018/02/26 13:03
Step 3: Setting the language and the clock
1
Press the ON/OFF (Power)
button to turn on the camera.
ON/OFF (Power) button
2
Select the desired language
and then press the center of
the control wheel.
3
Make sure that [Enter] is selected on the screen and then press
the center.
4
Select the desired geographic location and then press the
center.
5
Select [Date/Time] using the top/bottom of the control wheel
or by turning the control wheel, and then press the center.
6
Select the desired setting by pressing the top/bottom/left/
right side of the control wheel, and then press the center.
7
Repeat steps 5 and 6 to set other items, then select [Enter] and
press the center.
Hint
• To reset the date and time setting, use MENU (page 26).
To Next Page
Loading...
