When you use a new Eye-Fi card for the first time, copy the install file of the PC application
written in the Eye-Fi card first, then format the card.
Before using the Eye-Fi card, upgrade the firmware of the Eye-Fi card to the latest version.
For details on version upgrades, refer to the operating instructions supplied with the Eye-Fi
card.
When uploading image data, [Power Save] is not available.
If the
(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of
the camera off and on again. If the (error) icon is still displayed, the Eye-Fi card may be
corrupted. For details, contact Eye-Fi.Inc..
Wireless LAN communication may be interrupted by the other communication devices. If
data reception is insufficient, move the camera closer to the access point.
For details on content that can be uploaded, refer to the operating instructions supplied with
the Eye-Fi card.
Some Eye-Fi cards have an “Endless Mode.” This product does not support “Endless
Mode.” Make sure that Eye-Fi cards that you insert into this product have “Eye-Fi” turned
off. For details on setting “Endless Mode”, refer to the operating instructions supplied with
the Eye-Fi card.
Back to top
Copyright 2011 Sony Corporation
To Next Page
Loading...
