12
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape.
For details, see the instruction manual that
comes with the connected device.
Be sure to turn off all connected devices
before making connections.
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the CD player and
the connected device so that the sound will not be
distorted or noisy.
About the G-PROTECTION function
when using the connecting cord
• To record high quality CD sound, set the
G-PROTECTION switch to “OFF.”
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
B
Connecting your CD player
Connecting cord
Left (white)
Right (red)
to i
Adjust the
volume.
To Next Page
Loading...
