52
US
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive a Dolby Digital signal, you need to
connect a TV or other component to the unit with a
digital optical or digital coaxial cord (page 22).
Press AUDIO repeatedly to select the audio
signal.
The selected item appears in the front panel
display.
•“MAIN”
: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN+SUB”: Mixed sound of both the main
and sub languages will be output.
Changing the Input Level
of the Sound from
Connected Components
The sound distortion of the connected
component may be improved by reducing the
input level.
1 Press TV/CABLE or AUDIO IN.
2 Press SYSTEM MENU.
3 Press X/x to select “ATTENUATE,”
then press or c.
4 Press X/x to select a setting, then
press .
• “ATT ON”: You can attenuate the input
level.
• “ATT OFF”: Normal input level.
This setting is made separately for each
function.
5 Press SYSTEM MENU.
To Next Page
Loading...
Need help?
General
