Sony DCX-930 - Page 14

Chapter 1
Precautions
Transporting
When you transport the camera, repack it as it was
originally shipped. Do not discard the packing carton. It
will afford maximum protection whenever you transport
the camera.
Cleaning
© To clean the external surfaces of the camera, use a soft,
dry cloth. For severe stains, use a soft cloth dampened
with a small quantity of neutral detergent, then wipe dry.
© Do not use volatile solvents such as alcohol, benzine
and thinners; they may damage the surface finish.
in case of trouble
In case of trouble, and also if you have any questions
about this camera, contact your authorized Sony dealer.
AY olor: | Ol 01 OR sdal-leloreal-lar:|
Because of the high sensitivity of the CCD image sensors,
the following phenomena may appear on the monitor
screen while you are using the DXC-930/930P color
camera. These phenomena do not mean that there is
anything wrong with the camera.
1-8(E) | Chapter 1 Introduction
Vertical smear
This may appear when shooting a very bright subject
with most CCD cameras, but only seldom with this
DXC-930/930P.
Pale vertical streak
'
Video monitor
screen
Very bright subject
(such as an electric
lamp, fiuorescent
lamp. sunlight, or
strong reflected light)
Aliasing
When shooting fine stripes, straight lines or similar
patterns, the shot image may appear jagged.