Sony DCX-930 - Page 13

Precautions
Mounting the lens
Any inappropriate way of mounting the lens may cause
damages to both the camera and lens. Read carefully the
instructions given in “Mounting the Lens” on page 2-2(E).
Power supply
Use only with the following camera adaptor or camera
contro! unit according to the use.
CMA-D2
oxcooo || Gat Na
CMA-D2CE
DXC-930P | CMA-D2MDCE CCU-M3P/M7P
For more information, contact your Sony dealer.
Do not disassemble
Do not open the casing. Be careful that touching any
internal precision components may damage them.
Keep foreign matters out of the casing
Be careful not to spill water or other liquids on the
camera, or not to get flammable or metallic material
inside the casing. If used with any foreign matters inside,
the camera may fail or be a cause of fire or electric shock.
Chapter 1
Keep well ventilated
Do not block air circulation around the camera to prevent
internal heat build-up.
Operating or storage location
Avoid operating or store the camera in the following
locations:
© Extremely hot or cold locations (see “Specifications”
on page A-2(E) for operating and storage temperature
ranges);
¢ Damp or dusty locations;
© Where it is exposed to rain;
© Locations subject to strong vibrations;
© Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
Chapter 1 Introduction ( 1-7(E)