Sony DHC-FL5D - Specifications

Additional Information
67
GB
Specifications
AUDIO POWER SPECIFICATION:
(DHC-FL7D USA model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
with 8 ohm loads both channels driven, from
120 Hz – 10 kHz; rates 60 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
Center speaker: 60 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer: 120 watts
(8 ohms at 100 Hz, 10%
THD)
Amplifier section
Canadian model:
DHC-FL7D
Continuous RMS power output (reference)
Front speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Center speaker: 60 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer: 120 watts
(8 ohms at 100 Hz, 10%
THD)
Total harmonic distortion less than 0.07%
(8 ohms at 1 kHz,
35 watts)
European model:
DHC-FL7D
DIN power output at stereo mode (rated)
45 + 45 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Center speaker: 60 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer: 120 watts
(8 ohms at 100 Hz, 10%
THD)
Music power output (reference)
Front speaker: 120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Center speaker: 120 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker: 120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer: 240 watts
(8 ohms at 100 Hz, 10%
THD)
continued